Siemens 6SL3210-1KE26-0UF1

Siemens 6SL3210-1KE26-0UF1 is a high-performance inverter belonging to the G120 series. This product is produced by Siemens and is widely used in the field of industrial automation.

The following is a detailed introduction to the product:

Basic Information

Brand: Siemens/Siemens

Model: 6SL3210-1KE26-0UF1

Origin: Germany

Product Series: G120 Inverter

Technical specifications

Nominal power: Based on similar models, the nominal power may be similar to other products in the same series, such as 30.0kW or higher, but the official data shall prevail.

Working voltage: Usually supports 380-480V+10/-20% three-phase AC power supply, the specific voltage range may vary depending on product configuration.

Output frequency: The output frequency range of the inverter can be adjusted according to the specific application, but the specific value is not specified in the information provided.

Overload capacity: Usually has 150% overload capacity with a duration of 3 seconds to cope with instantaneous load increases.

Protection level: IP20/UL Open Type, suitable for general industrial environments.

Integrated functions: including integrated safe torque cut-off, integrated fieldbus (such as PROFINET-PN), etc., which improves the reliability and ease of use of the equipment.

Interface and communication

I/O interface: Provides 6 digital inputs (DI), 2 digital outputs (DO), 1 analog input (AI) and 1 analog output (AO) to meet diverse control needs.

Communication protocol: Supports multiple communication protocols, such as PROFINET-PN, to facilitate data exchange with host computers or other devices.

environmental adaptability

Operating temperature: Can work normally in the temperature range of -20°C to 50°C, suitable for most industrial environments.

Working humidity: There are certain requirements for the humidity of the environment, usually 30% to the upper limit of relative humidity (the specific value is not specified in the data).

Appearance and installation

Overall dimensions: approximately 10.60 x 10.80 x 8.60mm (or similar dimensions, subject to actual object), modular design for easy installation and maintenance.

Installation method: Usually on-site installation is used to adapt to various industrial site layouts.

Other features

Modular design: G120 series inverters adopt a modular design, and the control unit (CU) and power module (PM) can be replaced independently, reducing maintenance costs.

High efficiency and energy saving: Using advanced frequency conversion technology, it can achieve high-efficiency conversion while reducing energy consumption.

Safe and reliable: Integrate a variety of safety protection functions to ensure the safety and stability of the equipment during operation.

Summarize

As a high-performance G120 series inverter, Siemens 6SL3210-1KE26-0UF1 has broad application prospects in the field of industrial automation with its modular design, high efficiency and energy saving, safety and reliability, and rich interface and communication functions. However, since specific technical specifications may vary depending on product configuration, users are advised to consult the supplier in detail before purchasing or consult official information to obtain accurate information. If you need this product, you can contact us!